铌微合金化,Nb microalloying
1)Nb microalloying铌微合金化
1.Development of Nb Microalloying 400 MPa Ⅲ Grade Steel Reinforced Bar;铌微合金化400MPaⅢ级钢筋的开发
2.This paper introducesNb microalloying technologies to produce HRB400 bar, which include steelmaking, continuous casting and rolling.介绍采用铌微合金化生产HRB400钢筋的工艺技术,包括合适的冶炼、连铸和轧制工艺。
英文短句/例句
1.Numerical simulation for finish rolling of niobium micro-alloyed high carbon steel on four stands铌微合金化高碳钢四机架精轧的数值模拟
2.The production of high strength and toughness steel plates used for pipeline by Nb microalloying process was introduced.阐述了利用铌微合金化技术生产高强韧性管线用钢板的工艺技术。
3.Effect of Nb microalloying on the microstructure and mechanical properties of high-Al cold-rolled TRIP steel铌微合金化对高Al冷轧TRIP钢组织与力学性能的影响
4.Study on Technology of Nb-V Micro-alloyed HRB500 Ribbed Bar铌钒复合微合金化HRB500钢筋工艺研究
5.nitrided niobium-titanium-tungsten alloy氧化铌--钛--钨合金
6.Development and Production of Niobium,Titanium Microalloying Hot Strip铌、钛微合金化热轧带钢的开发及生产
7.Development of Nb-Ti Micro-alloyed Steel for Automobile Frame 510L铌钛微合金化汽车大梁板510L开发
8.Optimal Design and Physical Metallurgy of Multilple Alloy Steel Containing Nb and Ti铌、钛复合微合金钢的优化设计及物理冶金
9.Austenite grain size and hardenability of Nb-B microalloyed gear steels铌硼微合金化齿轮钢的晶粒尺寸及淬透性
10.OXIDATION OF NIOBIUM AND NIOBIUM ALLOYS AT HIGH TEMPERATURE IN VACUUM铌和铌合金在真空高温下的氧化现象
11.The Study on the High-temperature Oxidation-resistant Coating on Niobium and Nb-base Alloy铌及铌合金高温抗氧化防护涂层研究
12.Effect of Nb+Ti microalloying on microstructure and properties of phosphorus-containing steel sheet铌钛复合微合金化对含磷冷轧结构钢板组织性能的影响
13.The Physicochemical Properties and Biological Safety of Ti-24Nb-4Zr-7.9 Sn Treated by Micro-arc Oxidation;微弧氧化处理的钛铌锆锡合金理化性能和生物安全性研究
14.STUDY ON TRANSVERSE CORNER CRACKING OCCURRENCE PREVENTION?OF THE Nb,V AND Ti MICROALLOYING STEEL CC SLABS减少含铌、钒、钛微合金化钢连铸板坯角横裂纹的研究
15.The Biological Study of Ti-24Nb-4Zr-7.9Sn Coated by Micro-arc Oxidation;经微弧氧化表面处理的钛铌锆锡合金的生物相容性研究
16.Microstructure and Properties of Nb、Ti-microalloyed Fine-grained DP Steels Based on Dynamic Transformation基于动态相变的铌、钛微合金化细晶DP钢的组织和性能
17.Upper Limit Temperature of Deformation Induced Transformation of Nb Microalloyed Steels铌微合金钢形变诱导相变的上限温度
18.Fatigue Behaviour of a 400 MPa Grade Nb Microalloyed Steel一种400MPa级铌微合金钢的疲劳性能
相关短句/例句
niobium micro-alloying铌微合金化
1.This article discusses the technological characteristics of development and production of currentniobium micro-alloying wide and heavy plate produced by Wuyang Iron and Steel Co.本文论述了舞钢当前的铌微合金化宽厚钢板开发生产技术特点,介绍了舞钢在桥梁、炉壳、造船及海洋平台、高层建筑、非调质CF高强钢、油气管线、工程机械、抗氢致裂纹(HIC)容器、厚度≥150mm的Z向钢板等9个领域铌微合金化技术应用及品种开发情况。
3)niobium microalloying铌微合金化
4)Nb micro-alloyed铌微合金化
1.Practice of controlled rolling and controlled cooling technology forNb micro-alloyed ribbed bar;铌微合金化HRB400钢筋控轧控冷工艺实践
2.Smelting and rolling control pointsare ensured through analyzing effect ofNb micro-alloyed process on property of finished HRB400 hot-rolling rebar.介绍HRB400钢筋的技术要求和工艺流程,通过分析铌微合金化工艺对成品HRB400热轧带肋钢筋性能的影响,确定冶炼和轧制控制要点。
5)Nb-microalloying铌微合金化
1.Practice of HRB400 steel grade production by adoption of nitrification intensifier andNb-microalloying process;采用氮化增强剂和铌微合金化生产HRB400钢
6)Nb-Ti micro-alloyed steel铌钛微合金化钢
延伸阅读
钽铌合金分子式：CAS号：性质：以钽为基加入铌等元素的合金。有耐蚀型和电容器型两种。前者主要牌号有KB141(37.5％Nb，2.5％W，2.0％Mo，余量钽)、Ta-3Nb等。后者主要有Ta-25Nb，Ta-10Nb等。KB141合金具有优良的低温延性，抗拉强度达517GPa，抗腐蚀能力强，如在20％盐酸中腐蚀速率仅2.5μm/a。主要用于化学工业。Ta-25Nb合金漏电流仅0.133μA/cm2，用作薄膜型电解电容器。采用粉末冶金法生产。
