"往复摩擦磨损"是指在机械运动中，由于物体表面的相互接触和相对运动而引起的磨损现象。本主题旨在收集有关往复摩擦磨损、reciprocating、friction和wear的英语短句和例句。这些句子旨在帮助读者了解磨损现象在不同背景下的应用和响。无论是工程材料研究、装配工艺控制还是产品设计改进，这些例句都可以为相关领域的专业人士提供宝贵的信息和灵感。通过这些例句，读者可以更深入地了解往复摩擦磨损的原理和实际应用，并应用这些知识来解决工程和科学方面的问题。
往复摩擦磨损,reciprocating friction and wear
1)reciprocating friction and wear往复摩擦磨损
1.Effects of test parameters including surface roughness of titanium alloy,temperature of test environment,duration of test and components of some artificial synovia onreciprocating friction and wear behaviors of UHMWPE/Ti6Al4V rubbing pairs were investigated at 80%RH (relative humidity) with a homemadereciprocating friction and wear tester.采用自行研制的往复摩擦磨损试验机,在法向载荷50N、往复频率1Hz、摩擦副接触形式为圆环外圆周/平面、初始线接触长度为6mm、相对湿度为80%的试验条件下,研究了钛合金表面粗糙度、试验环境温度、试验延续时间、滑液成分等试验参数对UHMWPE/Ti6Al4V摩擦副的往复摩擦磨损行为的影响。
英文短句/例句
1.Study of Intelligent Testing System of HWF-5 Reciprocating Tribometer;HWF-5往复摩擦磨损试验机智能测试系统研究
2.Study of Numerical Simulation on Reciprocating Wear under Boundary Lubrication Condition;边界润滑状态下往复摩擦磨损的数值仿真研究
3.Reciprocating Friction and Wear Characteristics of UHMWPE Modified with Schiff Base Copper(Ⅱ) Complex under Boundary Lubrication in Calf Serum小牛血清边界润滑条件下西佛碱铜配合物改性超高分子量聚乙烯往复摩擦磨损行为
4.Development of WFM reciprocating friction wear testing machineWFM型往复式摩擦磨损试验机的研制
5.The Study of On-line Measuring and Testing Technique for Reciprocating Friction & Wear Experimental Machine;往复式摩擦磨损试验机在线检测技术的研究
6.Design of the test device for the frictional abrasion of the sucker rod centralizer往复式抽油杆扶正器摩擦磨损试验装置设计
7.Real-time Measuring and Testing Technique for Reciprocating Friction & Wear Experiment Based on Virtual Instrument;基于虚拟仪器往复式摩擦磨损试验实时测试技术研究
8.Study on Tribological Properties of PTFE-Based Composites;PTFE基复合材料摩擦磨损特性研究
9.Friction and wear properties of ZrO_2/SiO_2 nano-compositesZrO_2/SiO_2纳米复合颗粒的摩擦磨损性能
10.Electrical sliding wear behavior of C/C-Cu compositesC/C-Cu复合材料的载流摩擦磨损行为
11.Friction and wear behavior of Ti_3SiC_2 composite ceramics with addition of MoS_2添加MoS_2的Ti_3SiC_2复合陶瓷的摩擦磨损行为
12.Progress in Tribological Properties of Nanocomposites纳米复合材料摩擦磨损性能研究进展
13.FRICTION AND WEAR PROPERTIES OF Al_2O_3-SiC COMPOSITE CERAMICSAl_2O_3–SiC复相陶瓷的摩擦磨损特性
14.The Research for Friction and Wear Property of C/Cu Composite碳/铜复合材料摩擦磨损性能的研究
15.Investigation of the Friction and Wear Properties of Modified PA66 Composites改性PA66复合材料的摩擦磨损性能研究
16.To become worn or sore from rubbing.擦伤，擦疼因摩擦而磨损或擦疼
17.TRIBOLOGICAL AND REPAIRING PERFORMANCES OF Mg-Sn COMPOSITE NANOPARTICLESMg-Sn型复合纳米粒子的摩擦学和磨损修复性能
18.Wearing Self-repairing and Tribological Properties of Al Complex Additives铝复合添加剂的磨损自修复和摩擦学特性
相关短句/例句
reciprocating friction & wear experiment往复式摩擦磨损试验
1.In this paper, a real-time measuring and testing system based on Virtual Instruments (VI) forreciprocating friction & wear experiment is proposed.本文在研究了减振器往复运动特点的基础上，提出并研究了基于虚拟仪器的往复式摩擦磨损试验实时测试系统。
3)reciprocating friction往复摩擦
1.This Paper dealt with theseif-lubricating property and anti-wear mechanism of hot- pressed Ni-MoS2 composites inreciprocating friction, The formation process and morphological characteristics of MoS2 films onboth surfaces of the composite disk and its mat.对于含ＭｏＳ２的复合材料在单向滑动摩擦条件下的实用性能，人们已经进行了比较多的研究，然而好多摩擦部件在工程实际中经受的却都是往复摩擦。
4)frictional wear摩擦磨损
1.Locomotive and rolling stock wheel/railfrictional wear and energy-saving and consumption-reducing铁道机车车辆轮轨的摩擦磨损与节能降耗
2.Thefrictional wear,electric property and microscopic structure were investigated by a MG-2000 high temperature and speed friction wear testing machine,SX1934(SZ-82)four-.采用MG-2000型高速高温摩擦磨损试验机,SX1934(SZ-82)数字式四探针测试仪,XJL-03型金相显微镜,JSM-6700F扫描电镜等仪器测试并分析了其热摩擦磨损、电性能及显微组织。
3.The effect of different sintering temperature on the microstructure,density andfrictional wear property of the Fe-based powder metallurgy(P/M)brake materials of aircraft was studied.研究了不同烧结温度(900,930,950,980,1020℃)对飞机铁基粉末冶金刹车材料材料显微组织、致密化和摩擦磨损性能的影响。
5)friction and wear摩擦磨损
1.Effects of Rotating Speed on the Friction and Wear Behavior of Die Cast Magnesium Alloy AZ91D;转速对压铸镁合金AZ91D摩擦磨损特性的影响
2.Effect of carbonization onfriction and wear properties of C/C-SiC braking materials;炭化工艺对C/C-SiC制动材料摩擦磨损性能的影响
3.BP neural network analysis of dry slidingfriction and wear of UHMWPE composites;硅灰石纤维填充超高分子量聚乙烯基复合材料干滑动摩擦磨损的BP神经网络分析
6)wear and friction摩擦磨损
1.Effects of Speed and Load on Loading Wear and Friction Resistance of Al_2O_3/Cu Composites;Al_2O_3/Cu复合材料的载流摩擦磨损性能
2.Research progress ofwear and friction behavior and its mechanism of UHMWPE is introduced.介绍了超高相对分子质量聚乙烯(UHMWPE)的摩擦磨损特性及其机理的研究进展,重点介绍了改进摩擦磨损性能方法的研究进展,包括交联改性、填料填充改性、增强改性、共混和加工方法的研究等,并针对这些方法的不足之处和可能的新方法提出了今后的研究方向。
3.Its slidingwear and friction properties were measured by means of a home designed pin on disk apparatus.选用聚醚醚酮（ＰＥＥＫ）为对象，研究其无润滑条件下的滑动摩擦磨损行为，根据实验测得的有关特性，磨屑形态及试样摩擦面特征，提出了塑性流动磨损机理，解释了实验现象。
延伸阅读
往复往复 往复 反复往来。《素问·气交变大论》：“阴阳往复，寒暑迎随。”
